Always read the enclosed instructions carefully before testing.
If testing before your expected period, use the first urine of the day and avoid drinking excessive amounts of liquid beforehand.
Remove the test from its foil wrapper and take off the cap. Place the absorbent tip in your urine stream or into a urine sample collected in a clean, dry container.
When the stop light begins flashing, enough urine has been collected. Replace the cap and lay the test flat. The Smart Countdown will appear on the display while the test processes your sample.
Within approximately 1–5 minutes, the display will show either "Pregnant" or "Not Pregnant".
Understanding Your Result
If the result is Pregnant, contact your doctor or healthcare professional for advice on the next steps.
If the result is Not Pregnant but you tested early, your hCG level may not yet be high enough to detect. Consider testing again after a few days. If your period is late and you continue to receive a negative result, speak to your doctor.
Important Information
For self-testing at home. For in-vitro diagnostic use only. Each test is for single use only.
Certain fertility medicines containing hCG and some medical conditions may affect pregnancy test results. Always read the enclosed instructions and check any medication information before testing.
Keep out of reach of children.