For first time usage: firmly rotate the cap 360° at least 3 times to activate the pen. If this instruction is not followed, the pen won’t be activated and will not be suitable for use anymore. Align the blue (on cap) and white (on pen) knobs. Then pull to remove the cap. Click the blue button until a small drop of liquid is visible on a paper or tissue. Place the tip of the device onto the surface of the wart and click the blue button again. Keep the tip in contact with the wart for approximately 10 seconds while applying a mild pressure.
The wart generally gets covered by a typical, for the treatment, “white frost”. In case of larger warts ( > 6mm) an additional application may be required.
After treatment, recap firmly. Rotate the cap and make sure the blue and white knobs are not aligned to activate the closing mechanism.
Repeat the treatment once per week for a maximum of 6 weeks or until the wart has disappeared. For better results, we recommend to soak the feet or hands in warm water for 5 minutes prior to treatment.
During the treatment period, the wart may become dark. This is normal and part of the healing process. A slight tingling sensation might be noticeable. This is normal and transient. If the discomfort persists in the following days, discontinue the treatment and consult a doctor.
Treated skin should be protected from the sun until 30 days after treatment. Once opened, the product must be used within 6 weeks Make sure to rotate (do not pull) the blue cap before first usage in order to activate the mechanism.
Read the instruction leaflet carefully. Keep out of reach of children. Do not shake the pen at any time.